Cisco Nexus 7000 Series Command Reference Manual page 80

random-detect cos-based
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
random-detect cos-based
To configure weighted random early detection (WRED) on both ingress and egress queues by setting
minimum and maximum packet drop thresholds, use the random-detect cos-based command. To
remove a WRED configuration, use the no form of this command.
Syntax Description
aggregate
minimum-thre
shold
min-threshold
packets
bytes
kbytes
mbytes
ms
us
percent
min-percent-of
-qsize
maximum-thr
eshold
max-threshold
max-percent-of
-qsize
Defaults Thresholds are in packets by default.
Command Modes
Policy map type queuing class configuration
Supported User Roles
network-admin
vdc-admin
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-70
random-detect cos-based [aggregate [minimum-threshold] {min-threshold [packets | bytes |
kbytes | mbytes | ms | us] | percent min-percent-of-qsize} [maximum-threshold]
{max-threshold [packets | bytes | kbytes | mbytes | ms | us] | percent max-percent-of-qsize}]
no random-detect cos-based [aggregate [minimum-threshold] {min-threshold [packets | bytes |
kbytes | mbytes | ms | us] | percent min-percent-of-qsize} [maximum-threshold]
{max-threshold [packets | bytes | kbytes | mbytes | ms | us] | percent max-percent-of-qsize}]
(Optional) Specifies where the software applies aggregate thresholds for CoS
values that are not specified in the random-detect command.
(Optional) Specifies the minimum threshold.
Minimum threshold. Valid values are from 1 to 52428800.
(Optional) Specifies that thresholds are in packets.
(Optional) Specifies that thresholds are in bytes.
(Optional) Specifies that thresholds are in kilobytes.
(Optional) Specifies that thresholds are in megabytes.
(Optional) Specifies that thresholds are in milliseconds at the underlying interface
minimum guaranteed link rate
(Optional) Specifies that thresholds are in microseconds at the underlying interface
minimum guaranteed link rate.
Specifies the percentage of the threshold.
(Optional) Minimum percentage of the buffer memory used by the queue. Valid
values are from 1 to 100.
Specifies the maximum threshold.
Maximum threshold. Valid values are from 1 to 52428800.
(Optional) Maximum percentage of the buffer memory used by the queue. Valid
values are from 1 to 100.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
OL-23378-01