Cisco Nexus 7000 Series Command Reference Manual page 23

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
class-map
To create or modify a class map that defines a class of traffic and enter the class-map configuration mode,
use the class-map command. To remove a class map, use the no form of this command.
Syntax Description
type qos
match-any
match-all
class-map-name
conform-color-in
conform-color-out
exceed-color-in
exceed-color-out
Defaults type—qos
Command Modes Global configuration
Supported User Roles network-admin
vdc-admin
Command History Release
4.0
OL-23378-01
class-map [type qos] {[match-any | match-all] class-map-name | conform-color-in |
conform-color-out | exceed-color-in | exceed-color-out}
no class-map [type qos] {class-map-name | [match-any | match-all]}
(Optional) Specifies the component type qos for the class map. By default,
the class map type is qos.
Specifies that if the packet matches any of the criteria configured for this
class map with the match command, then this class map is applied to the
packet.
Specifies that if the packet matches all the criteria configured for this class
map with the match command, then this class map is applied to the packet.
This is the default action if match-any is not specified.
Note
Name assigned to the class map. The name class-default is reserved.
Specifies the type qos conform color class map in the input direction. This
color-aware class map makes a policer color-aware for conform action.
Specifies the type qos conform color class map in the output direction. This
color-aware class map makes a policer color-aware for conform action.
Specifies the type qos exceed color class map in the input direction. This
color-aware class map makes a policer color-aware for exceed action.
Specifies the type qos exceed color class map in the output direction. This
color-aware class map makes a policer color-aware for exceed action.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
This option does not work. The match criteria is always treated as
match-any.
class-map
QOS-13