Match Ip Rtp - Cisco Nexus 7000 Series Command Reference Manual

Cisco Nexus 7000 Series NX-OS Quality of Service Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

match ip rtp

To configure a class map to use the Real-Time Protocol (RTP) port as a match criteria, use the match ip
rtp command. To remove the RTP port as a match criteria, use the no form of this command.
Syntax Description
not
port-list
Defaults None
Command Modes Class-map type qos configuration
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0
Usage Guidelines To specify a list of values, use one of the following options:
•
•
This command does not require a license.
Examples
This example shows how to match on a port using RTP:
switch(config)# class-map my_test
switch(config-cmap-qos)# match ip rtp 2300
Related Commands Command
show class-map
OL-23378-01
match [not] ip rtp port-list
no match [not] ip rtp port-list
(Optional) Negates the specified match result.
Specified User Datagram Protocol (UDP) or list of UDP ports that are
using RTP. Valid values are from 2000 to 65535.
Modification
This command was introduced.
Specify a range of values by separating each value with a dash.
Specify a noncontiguous list of values by separating each value by a comma.
Description
Displays class maps.
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
match ip rtp
QOS-33