From (Table Map) - Cisco Nexus 7000 Series Command Reference Manual

from (table map)

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
from (table map)
To specify a set of mappings of input field values to output field values in a table map, use the from
command.
Syntax Description source-value
dest-value
Defaults To configure the default mapping action for table maps, see the
Command Modes Table map configuration
Default table map configuration
Supported User Roles network-admin
vdc-admin
Command History Release
4.0
Usage Guidelines This command does not require a license.
Examples This example shows how to create a mapping from three source values to the corresponding destination
values:
switch(config)# table-map my_table1
switch(config-tmap)# from 0 to 7
switch(config-tmap)# from 1 to 6
switch(config-tmap)# from 2 to 5
Related Commands Command
default (table map)
show table-map
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-22
from source-value to dest-value
Source value in the range from 0 to 63.
Destination value in the range from 0 to 63.
Modification
This command was introduced.
Description
Specifies the default action for mapping of the input field value to the output
field value in a table map.
Displays table maps.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
default (table map) command.
OL-23378-01