Show Queuing Interface - Cisco Nexus 7000 Series Command Reference Manual

show queuing interface

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
show queuing interface
To display queuing information on a specified interface, use the show queuing interface command.
Syntax Description
ethernet
slot/port
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the queuing information for a specified interface:
switch# show queuing interface ethernet 2/9
Interface Ethernet2/9 TX Queuing strategy: Weighted Round-Robin
Port QoS is enabled
Configured WRR
4t-out-q3]
WRR configuration read from HW
4t-out-q3]
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-112
show queuing interface {ethernet slot/port}
Specifies the Ethernet interface.
Module number and the port number for which you want to display the queuing
information.
Modification
This command was introduced.
Queuing Mode in TX direction: mode-cos
Transmit queues [type = 1p3q4t]
Queue Id
_____________________________________________________________
1p3q4t-out-q-default
1p3q4t-out-q2
1p3q4t-out-q3
1p3q4t-out-pq1
WRR bandwidth ratios:
WRR bandwidth ratios:
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
Scheduling Num of thresholds
WRR 04
WRR 04
WRR 04
Priority 04
25[1p3q4t-out-q-default] 38[1p3q4t-out-q2] 37[1p3q
24[1p3q4t-out-q-default] 37[1p3q4t-out-q2] 37[1p3q
OL-23378-01