Match Class-Map - Cisco Nexus 7000 Series Command Reference Manual

match class-map

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
match class-map
To match on the match commands in a specified class map, use the match class-map command in the
class map configuration mode. To remove the match on the specified class map, use the no form of this
command.
Syntax Description
not
class-map-name
Defaults None
Command Modes Class-map type qos configuration
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0
Usage Guidelines This command does not require a license.
Examples This example shows how to match on the matches specified in class map named my_test:
switch(config)# class-map my_test
switch(config-cmap-qos)# match class-name my_test
Related Commands Command
show class-map
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-24
match [not] class-map class-map-name
no match [not] class-map class-map-name
(Optional) Negates the specified match result.
Specified class-map name where the match commands need to be matched.
Modification
This command was introduced.
Description
Displays class maps.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
OL-23378-01