Match Discard-Class - Cisco Nexus 7000 Series Command Reference Manual

match discard-class

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
match discard-class
To identify specific discard class values as a match criteria, use the match discard-class command. To
remove specified discard class values as a match criteria, use the no form of this command.
Syntax Description
not
discard-class-list
Defaults None
Command Modes Class-map type qos configuration
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0
Usage Guidelines The discard-class value is an internal label and is not part of the packet payload or any packet header.
The discard-class values have no mathematical significance.
To specify a list of values, use one of the following options:
•
•
This command does not require a license.
Examples
This example shows how to match on the discard class value 5:
switch(config)# class-map my_test
switch(config-cmap-qos)# match discard-class 5
Related Commands Command
show class-map
Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference, Release 5.x
QOS-30
match [not] discard-class discard-class-list
no match [not] discard-class discard-class-list
(Optional) Negates the specified match result.
Specified discard class value or list of discard class values. Valid values
are from 0 to 63.
Modification
This command was introduced.
Specify a range of values by separating each value with a dash.
Specify a noncontiguous list of values by separating each value by a comma.
Description
Displays class maps.
Cisco Nexus 7000 Series NX-OS Quality of Service Commands
OL-23378-01