Cisco FirePOWER ASA 5500 series Configuration Manual page 906

TCP and UDP Ports
The security appliance listens for RADIUS on ports 1645 and 1646. If your RADIUS server uses
•
the standard ports 1812 and 1813, you can configure the security appliance to listen to those ports
using the authentication-port and accounting-port commands.
To assign a port for DNS access, use the domain literal value, not dns. If you use dns, the security
•
appliance assumes you meant to use the dnsix literal value.
Port numbers can be viewed online at the IANA website:
http://www.iana.org/assignments/port-numbers
Table D-5
Literal
aol
bgp
biff
bootpc
bootps
chargen
citrix-ica
cmd
ctiqbe
daytime
discard
domain
dnsix
echo
exec
finger
ftp
ftp-data
gopher
https
h323
hostname
ident
imap4
irc
Cisco Security Appliance Command Line Configuration Guide
D-12
Port Literal Values
TCP or UDP? Value
TCP 5190
TCP 179
UDP 512
UDP 68
UDP 67
TCP 19
TCP 1494
TCP 514
TCP 2748
TCP 13
TCP, UDP 9
TCP, UDP 53
UDP 195
TCP, UDP 7
TCP 512
TCP 79
TCP 21
TCP 20
TCP 70
TCP 443
TCP 1720
TCP 101
TCP 113
TCP 143
TCP 194
Appendix D
Description
America Online
Border Gateway Protocol, RFC 1163
Used by mail system to notify users that new mail is
received
Bootstrap Protocol Client
Bootstrap Protocol Server
Character Generator
Citrix Independent Computing Architecture (ICA)
protocol
Similar to exec except that cmd has automatic
authentication
Computer Telephony Interface Quick Buffer
Encoding
Day time, RFC 867
Discard
DNS
DNSIX Session Management Module Audit
Redirector
Echo
Remote process execution
Finger
File Transfer Protocol (control port)
File Transfer Protocol (data port)
Gopher
HTTP over SSL
H.323 call signalling
NIC Host Name Server
Ident authentication service
Internet Message Access Protocol, version 4
Internet Relay Chat protocol
Addresses, Protocols, and Ports
OL-10088-01