Cisco FirePOWER ASA 5500 series Configuration Manual page 394

Chapter 22 Managing AIP SSM and CSC SSM
Transferring an Image onto an SSM
Check the progress of the image transfer and SSM restart process. To do so, use the show module
Step 3
command. For details, see the "Checking SSM Status" section on page 22-13.
When the adaptive security appliance completes the image transfer and restart of the SSM, the SSM is
running the newly transferred image.
If your SSM supports configuration backups and you want to restore the configuration of the application
Note
running on the SSM, see the documentation for your SSM for details.
Cisco Security Appliance Command Line Configuration Guide
22-16
OL-10088-01