Creating A Capture File - Cisco FirePOWER ASA 5500 series Configuration Manual

Security appliance command line
Hide thumbs Also See for FirePOWER ASA 5500 series:
Table of Contents

Advertisement

Capturing WebVPN Data

Creating a Capture File

Perform the following steps to capture data about a WebVPN session to a file.
Step 1
To start the WebVPN capture utility, use the capture command from privileged EXEC mode.
capture capture_name type webvpn user webvpn_username
where:
The capture utility starts.
A WebVPN user logs in to begin a WebVPN session. The capture utility is capturing packets.
Step 2
Stop the capture by using the no version of the command.
no capture capture_name
The capture utility creates a capture_name.zip file, which is encrypted with the password koleso.
Step 3
Send the .zip file to Cisco Systems, or attach it to a Cisco TAC service request.
To look at the contents of the .zip file, unzip it using the password koleso.
Step 4
The following example creates a capture named hr, which captures WebVPN traffic for user2 to a file:
hostname# capture hr type webvpn user user2
WebVPN capture started.
capture name
user name
hostname# no capture hr
Using a Browser to Display Capture Data
Perform the following steps to capture data about a WebVPN session and view it in a browser.
Step 1
To start the WebVPN capture utility, use the capture command from privileged EXEC mode.
capture capture_name type webvpn user webvpn_username
where:
The capture utility starts.
A WebVPN user logs in to begin a WebVPN session. The capture utility is capturing packets.
Step 2
Stop the capture by using the no version of the command.
Open a browser and in the address box enter
Step 3
https://IP_address or hostname of the security appliance/webvpn_capture.html
Cisco Security Appliance Command Line Configuration Guide
37-50
capture_name is a name you assign to the capture, which is also prepended to the name of the
capture files.
webvpn_user is the username to match for capture.
hr
user2
capture_name is a name you assign to the capture, which is also prepended to the name of the
capture files.
webvpn_user is the username to match for capture.
Chapter 37
Configuring WebVPN
OL-10088-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pix 500 seriesCisco asa 5500 series

Table of Contents