Viewing Auto Update Status - Cisco FirePOWER ASA 5500 series Configuration Manual

Configuring Auto Update Support
component {asdm | image} specifies the software component, either ASDM or the boot image of the
security appliance.
device-id dev_string specifies a unique string that the Auto Update client uses to identify itself. The
maximum length is 63 characters.
family family_name specifies the family name that the Auto Update client uses to identify itself. It can
be asa, pix, or a text string with a maximum length of 7 characters.
rev-nums rev-nums specifies the software or firmware images for this client. Enter up to 4, in any order,
separated by commas.
type type specifies the type of clients to notify of a client update. Because this command is also used to
update Windows clients, the list of clients includes several Windows operating systems. The security
appliances in the list include the following:
•
•
•
•
•
•
•
•
url url-string specifies the URL for the software/firmware image. This URL must point to a file
appropriate for this client. For all Auto Update clients, you must use the protocol "http://" or "https://"
as the prefix for the URL.
Configure the parameters for the client update that you want to apply to all security appliances of a
particular type. That is, specify the type of security appliance and the URL or IP address from which to
get the updated image. In addition, you must specify a revision number. If the revision number of the
remote security appliance matches one of the specified revision numbers, there is no need to update—the
client ignores the update.
The following example configures a client update for Cisco 5520 Adaptive Security Appliances:
hostname(config)# client-update type asa5520 component asdm url
http://192.168.1.114/aus/asdm501.bin rev-nums 7.2(1)

Viewing Auto Update Status

To view the Auto Update status, enter the following command:
hostname(config)# show auto-update
The following is sample output from the show auto-update command:
hostname(config)# show auto-update
Server: https://********@209.165.200.224:1742/management.cgi?1276
Certificate will be verified
Poll period: 720 minutes, retry count: 2, retry period: 5 minutes
Timeout: none
Device ID: host name [corporate]
Next poll in 4.93 minutes
Cisco Security Appliance Command Line Configuration Guide
41-12
pix-515: Cisco PIX 515 Firewall
pix-515e: Cisco PIX 515E Firewall
pix-525: Cisco PIX 525 Firewall
pix-535: Cisco PIX 535 Firewall
asa5505: Cisco 5505 Adaptive Security Appliance
asa5510: Cisco 5510 Adaptive Security Appliance
asa5520: Cisco 5520 Adaptive Security Appliance
asa5540: Cisco Adaptive Security Appliance
Chapter 41 Managing Software, Licenses, and Configurations
OL-10088-01