Customizing The Prompt Dialogs - Cisco FirePOWER ASA 5500 series Configuration Manual

WebVPN End User Setup
Figure 37-13
application-access window {text | style} value
The following procedure guides you through customizing the Application Access window using CLI
commands and includes examples of the commands:
Enter WebVPN customization mode using the customization command from webvpn mode:
Step 1
hostname(config)# webvpn
hostname(config-webvpn)# customization cisco
hostname(config-webvpn-custom)#
Change the Application Access window using the application-access window command:
Step 2
hostname(config-webvpn-custom)# application-access window text URLs to Browse
hostname(config-webvpn-custom)# application-access window style color:red
Enable or disable the Hiding of application details displayed in the WebVPN Applications Access
Step 3
window using the application-access hide-details command:
The default is disabled. Application details are not hidden—they display in the Application Access
window.
hostname(config-webvpn-custom)# application-access hide-details enable

Customizing the Prompt Dialogs

The security appliance may send WebVPN users various prompt dialog messages as notices or warnings.
Figure 37-14
customize the appearance of these messages.
Cisco Security Appliance Command Line Configuration Guide
37-40
Application Access Window
application-access hide-details {enable | disable}
[no] application-access window {text | style} value
[no] application-access hide-details {enable | disable}
shows a sample dialog message and the associated CLI commands you can use to
Chapter 37 Configuring WebVPN
OL-10088-01