Cisco FirePOWER ASA 5500 series Configuration Manual page 342

Configuring Authorization for Network Access
| permit tcp any host 10.0.0.253
| permit udp any host 10.0.0.253
| permit icmp any host 10.0.0.253
| permit tcp any host 10.0.0.252
| permit udp any host 10.0.0.252
| permit icmp any host 10.0.0.252
| permit ip any any
+--------------------------------------------+
For more information about creating downloadable access lists and associating them with users, see the
user guide for your version of Cisco Secure ACS.
On the security appliance, the downloaded access list has the following name:
#ACSACL#-ip-acl_name-number
The acl_name argument is the name that is defined on Cisco Secure ACS (acs_ten_acl in the preceding
example), and number is a unique version ID generated by Cisco Secure ACS.
The downloaded access list on the security appliance consists of the following lines:
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit tcp any host 10.0.0.254
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit udp any host 10.0.0.254
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit icmp any host 10.0.0.254
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit tcp any host 10.0.0.253
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit udp any host 10.0.0.253
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit icmp any host 10.0.0.253
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit tcp any host 10.0.0.252
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit udp any host 10.0.0.252
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit icmp any host 10.0.0.252
access-list #ACSACL#-ip-asa-acs_ten_acl-3b5385f7 permit ip any any
Configuring Any RADIUS Server for Downloadable Access Lists
You can configure any RADIUS server that supports Cisco IOS RADIUS VSAs to send user-specific
access lists to the security appliance in a Cisco IOS RADIUS cisco-av-pair VSA (vendor 9, attribute 1).
In the cisco-av-pair VSA, configure one or more ACEs that are similar to the access-list extended
command (see the
following command prefix:
access-list acl_name extended
with the following text:
ip:inacl#nnn=
The nnn argument is a number in the range from 0 to 999999999 that identifies the order of the command
statement to be configured on the security appliance. If this parameter is omitted, the sequence value is
0, and the order of the ACEs inside the cisco-av-pair RADIUS VSA is used.
The following example is an access list definition as it should be configured for a cisco-av-pair VSA on
a RADIUS server:
ip:inacl#1=permit tcp 10.1.0.0 255.0.0.0 10.0.0.0 255.0.0.0
ip:inacl#99=deny tcp any any
ip:inacl#2=permit udp 10.1.0.0 255.0.0.0 10.0.0.0 255.0.0.0
ip:inacl#100=deny udp any any
ip:inacl#3=permit icmp 10.1.0.0 255.0.0.0 10.0.0.0 255.0.0.0
For information about making unique per user the access lists that are sent in the cisco-av-pair attribute,
see the documentation for your RADIUS server.
Cisco Security Appliance Command Line Configuration Guide
19-10
"Adding an Extended Access List" section on page
Chapter 19 Applying AAA for Network Access
|
|
|
|
|
|
|
16-5), except that you replace the
OL-10088-01