Cisco FirePOWER ASA 5500 series Configuration Manual page 426

Configuring Application Inspection
Table 25-2
Keywords
h323 h225 [map_name]
h323 ras [map_name]
http [map_name]
icmp
icmp error
ils
im [map_name]
mgcp [map_name]
netbios [map_name]
pptp
radius-accounting [map_name]
rsh
rtsp
sip [map_name]
Cisco Security Appliance Command Line Configuration Guide
25-8
Protocol Keywords
Chapter 25 Configuring Application Layer Protocol Inspection
Notes
If you added an H323 inspection policy map according to
"Configuring an H.323 Inspection Policy Map for
Additional Inspection Control" section on page
identify the map name in this command.
If you added an H323 inspection policy map according to
"Configuring an H.323 Inspection Policy Map for
Additional Inspection Control" section on page
identify the map name in this command.
If you added an HTTP inspection policy map according to
the "Configuring an HTTP Inspection Policy Map for
Additional Inspection Control" section on page
identify the map name in this command.
—
—
—
If you added an Instant Messaging inspection policy map
according to "Configuring an Instant Messaging Inspection
Policy Map for Additional Inspection Control" section on
page 25-48, identify the map name in this command.
If you added an MGCP inspection policy map according to
"Configuring an MGCP Inspection Policy Map for
Additional Inspection Control" section on page
identify the map name in this command.
If you added a NetBIOS inspection policy map according to
"Configuring a NetBIOS Inspection Policy Map for
Additional Inspection Control" section on page
identify the map name in this command.
—
The radius-accounting keyword is only available for a
management class map. See the
Map for Management Traffic" section on page 21-5
information about creating a management class map.
If you added a RADIUS accounting inspection policy map
according to "Configuring a RADIUS Inspection Policy
Map for Additional Inspection Control" section on
page 25-59, identify the map name in this command.
—
—
If you added a SIP inspection policy map according to
"Configuring a SIP Inspection Policy Map for Additional
Inspection Control" section on page
name in this command.
25-38,
25-38,
25-44,
25-54,
25-57,
"Creating a Layer 3/4 Class
for more
25-63, identify the map
OL-10088-01