Chapter 14
Configuring Failover
Table 14-8
Field
Viewing Monitored Interfaces
To view the status of monitored interfaces, enter the following command. In single context mode, enter
this command in global configuration mode. In multiple context mode, enter this command within a
context.
primary/context(config)# show monitor-interface
For example:
hostname/context(config)# show monitor-interface
Displaying the Failover Commands in the Running Configuration
To view the failover commands in the running configuration, enter the following command:
hostname(config)# show running-config failover
All of the failover commands are displayed. On units running multiple context mode, enter this command
in the system execution space. Entering show running-config all failover displays the failover
commands in the running configuration and includes commands for which you have not changed the
default value.
OL-10088-01
Show Failover Display Description (continued)
VPN IPSEC upd
VPN CTCP upd
VPN SDI upd
VPN DHCP upd
GTP PDP
GTP PDPMCB
Logical Update Queue
Information
Recv Q
Xmit Q
This host: Primary - Active
Interface outside (192.168.1.2): Normal
Interface inside (10.1.1.91): Normal
Other host: Secondary - Standby
Interface outside (192.168.1.3): Normal
Interface inside (10.1.1.100): Normal
Options
IPSec connection information.
cTCP tunnel connection information.
SDI AAA connection information.
Tunneled DHCP connection information.
GTP PDP update information. This information appears only if inspect
GTP is enabled.
GTP PDPMCB update information. This information appears only if
inspect GTP is enabled.
For each field type, the following statistics are used:
Cur—Current number of packets
•
Max—Maximum number of packets
•
Total—Total number of packets
•
The status of the receive queue.
The status of the transmit queue.
Cisco Security Appliance Command Line Configuration Guide
Configuring Failover
14-45