Viewing Qos Policy Map Configuration - Cisco FirePOWER ASA 5500 series Configuration Manual

Chapter 24 Applying QoS Policies
The following example shows the output of show service-policy with the priority keyword:
hostname# show service-policy priority
Global policy:
Interface outside:

Viewing QoS Policy Map Configuration

To view all policy maps, including those that include the police and priority commands, use the
following command in privileged EXEC mode:
hostname# show running-config policy-map
For the foregoing examples, the output of this command would look something like the following:
hostname# show running-config policy-map
!
policy-map test
class class-default
policy-map inbound_policy
class ftp-port
inspect ftp strict inbound_ftp
policy-map qos
class browse
police 56000 10500
class TG1-voice
priority
class TG1-BestEffort
police 200000 37500
Viewing the Priority-Queue Configuration for an Interface
To display the priority-queue configuration for an interface, enter the show running-config
priority-queue command in global configuration mode. The following example shows the priority-queue
configuration for the interface named "test":
hostname(config)# show running-config priority-queue test
priority-queue test
queue-limit
tx-ring-limit 256
hostname(config)#
OL-10088-01
Class-map: cmap2
police Interface outside:
cir 200000 bps, bc 37500 bytes
conformed 17179 packets, 20614800 bytes; actions: transmit
exceeded 617 packets, 770718 bytes; actions: drop
conformed 198785 bps, exceed 2303 bps
Service-policy: global_fw_policy
Service-policy: qos
Class-map: TG1-voice
Priority:
Interface outside: aggregate drop 0, aggregate transmit 9383
2048
Cisco Security Appliance Command Line Configuration Guide
Viewing QoS Configuration
24-13