Apcf Example - Cisco FirePOWER ASA 5500 series Configuration Manual

Chapter 37 Configuring WebVPN

APCF Example

An example of an APCF profile follows:
<APCF>
<version>1.0</version>
<application>
<id>Do not compress content from notsogood.com</id>
<apcf-entities>
</apcf-entities>
</application>
</APCF>
WebVPN End User Setup
This section is for the system administrator who sets up WebVPN for end users. It describes how to
customize the end-user interface.
This section summarizes configuration requirements and tasks for a remote system. It specifies
information to communicate to users to get them started using WebVPN. It includes the following topics:
•
•
•
•
•
Defining the End User Interface
The WebVPN end user interface consists of a series of HTML panels. A user logs on to WebVPN by
entering the IP address of a security appliance interface in the format https://address. The first panel that
displays is the login screen
Figure 37-6
OL-10088-01
<process-request-header>
<conditions>
<server-fnmatch>*.notsogood.com</server-fnmatch>
</conditions>
<action>
<do><no-gzip/></do>
</action>
</process-request-header>
Defining the End User Interface
Customizing WebVPN Pages, page 37-34
Requiring Usernames and Passwords
Communicating Security Tips
Configuring Remote Systems to Use WebVPN Features
(Figure
WebVPN Login Screen
37-6).
Cisco Security Appliance Command Line Configuration Guide
WebVPN End User Setup
37-31