Change A Port Forwarding Rule - NETGEAR D8500 User Manual

8. Specify a new port forwarding rule with a custom service or application as described in the following table.
Field
Service Name
Service Type
External Starting Port
External Ending Port
Internal Starting Port
Internal Ending Port
Internal IP address
9. Click the Apply button.
Your settings are saved.The rule is added to the table on the Port Forwarding / Port Triggering page.

Change a Port Forwarding Rule

You can change an existing port forwarding rule.
To change a port forwarding rule:
AC5300 WiFi VDSL/ADSL Modem Router Model D8500
Description
Enter the name of the custom service or application.
Select the protocol ( TCP or UDP that is associated with the service or application.
If you are unsure, select TCP/UDP .
Enter the starting port number for the service or application.
If the service or application uses a single port, enter the same port number in the
External Ending Port field.
If the service or application uses a range of ports, enter the ending port number of the
range in the External Ending Port field.
Specify the internal ports by one of these methods:
•
If the external and internal ports are the same, leave the Use the same port range
for Internal port check box selected.
•
If the external and internal ports are different, in the Internal Starting Port field,
enter the starting port number for the service or application.The Internal Ending
Port field is populated automatically.
Either enter an IP address in the Internal IP address field or select the radio button
for an attached device that is listed in the table.
The modem router applies the new rule to the device that you select.
Manage Port Forwarding and Port Triggering
)
242