Remove A Reserved Ip Address Entry; Manage The Dhcp Server Address Pool - NETGEAR D8500 User Manual

AC5300 WiFi VDSL/ADSL Modem Router Model D8500
8. Click the Apply button.
Your settings are saved.

Remove a Reserved IP Address Entry

You can remove a reserved IP address entry.
To remove a reserved IP address entry:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter .routerlogin.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. In the Address Reservation section, select the radio button for the reserved address.
6. Click the Delete button.
The address entry is removed.

Manage the DHCP Server Address Pool

By default, the modem router acts as a Dynamic Host Configuration Protocol (DHCP) server.The
modem router assigns IP, DNS server, and default gateway addresses to all computers that are
connected to its LAN and WiFi networks.The assigned default gateway address is the LAN address of
the modem router.
These addresses must be part of the same IP address subnet as the modem router's LAN IP
address.The default DHCP address pool is 192.168.0.2–192.168.0.254.
The modem router delivers the following parameters to any LAN device that requests DHCP:
•
An IP address from the range that you define
•
Subnet mask
• Gateway IP address (the modem router's LAN IP address)
• DNS server IP address (the modem router's LAN IP address)
To specify the pool of IP addresses that the modem router assigns:
1. Launch a web browser from a computer or mobile device that is connected to the network.
Manage the WAN and LAN Network Settings
179