Cable Connection Without A Login - NETGEAR D8500 User Manual

AC5300 WiFi VDSL/ADSL Modem Router Model D8500
Specify a Cable Connection Without a Login
If you want to manually configure the cable connection settings, use the information that your ISP gave you
to connect to your Internet service. If you cannot find this information, contact your ISP. Entering incorrect
information might prevent the modem router from connecting to the Inter
To view or specify the settings for a cable Internet connection that does not require a
login:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter routerlogin
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password.The user name and password are case-
sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > WAN Setup.
The WAN Setup page displays.
5. From the WAN Preference menu, select Must use Ethernet WAN.
By default, the menu selection is Auto-Detect.
6. Click the Apply button.
Your settings are saved and the modem router restarts.
Note If you connect over WiFi to the modem router, you might need to reconnect and log in
again.
7. Select BASIC > Inter
The Internet Setup page displays.
8. From the Select Country menu, select the country in which you use the modem router.
The Select Country menu is not available in all countries and might be masked out.
9. From the Select Internet Service Provider menu, select the Internet service provider (ISP) that you
are using.
If your ISP is not in the menu, select Other.
10. Scroll down to the Does your Internet connection require a login? section and select the No radio button.
The following figure shows the settings that display when you configure a cable connection without a
login.The transfer mode and multiplexing method do not apply to a cable connection.
Manage the Internet Settings Manually
54