Change A Port Forwarding Rule - NETGEAR C6250 User Manual

Field
Internal IP address
External IP address
10. Click the Apply button.
Your settings are saved. The rule is added to the table on the Port Forwarding / Port
Triggering page.

Change a Port Forwarding Rule

You can change an existing port forwarding rule.
To change a port forwarding rule:

1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The following figure shows two port forwarding rules.
AC1600 WiFi Cable Modem Router
Description
Either enter an IP address in the Internal IP address field or select the radio
button for an attached device that is listed in the table.
Specify the external IP address by one of these methods:
• Leave Any selected from the External IP address menu.
• Select Single address from the External IP address menu and enter the IP
address that is allowed to reach the service or application.
Manage Port Forwarding and Port Triggering
169