NETGEAR D8500 User Manual page 96

•
6. In the WPA/WPA2 Enterprise section, enter the settings as described in the following table.
Field
Encryption Mode
Group Key Update Interval Enter the interval in seconds after which the RADIUS group key is updated. The default
RADIUS server IP Address
RADIUS server Port Enter the number of the port on the modem router that is used to access the RADIUS server for
RADIUS server Shared Secret Enter the shared secret (RADIUS password) that is used between the modem router
7. Click the Apply button.
Your settings are saved.
8. Make sure that you can reconnect over WiFi to the network with its new security settings.
If you cannot connect over WiFi, check the following:
•
If your computer or mobile device is already connected to another WiFi network in your area, disconnect
it from that WiFi network and connect it to the WiFi network that the modem router provides. Some WiFi
devices automatically connect to the first open network without WiFi security that they discover.
If your computer or mobile device is trying to connect to your network with its old settings (before you
changed the settings), update the WiFi network selection in your computer or mobile device to match
the current settings for your network.
AC5300 WiFi VDSL/ADSL Modem Router Model D8500
Description
From the Encryption Mode menu, select the enterprise mode:
•
WPA [TKIP] +WPA2 [AES].This type of security enables WiFi devices
that support either WPA or WPA2 to join the modem router's WiFi
network.This is the default mode.
•
WPA2 [AES].WPA2 provides a secure connection but some older WiFi
devices do not detect WPA2 and support only WPA. If your network
includes such older devices, select WPA [TKIP] + WPA2 [AES] security.
interval is 3600 seconds.
Enter the IPv4 address of the RADIUS server to which the WiFi network can connect.
authentication.The default port number is 1812.
and the RADIUS server during authentication of a WiFi user.
Manage the Basic WiFi Network Settings
96