Set Up A Vlan Iptv Bridge For A Vlan Tag Group - NETGEAR D8500 User Manual

•
If your device is connected to an Ethernet port on the modem router, select the Wired Ports check box that
corresponds to the Ethernet port on the modem router to which the device is connected.
• If your device is connected to your modem router's WiFi network, select the Wireless check box that
corresponds to the modem router's WiFi band to which the device is connected.
Note You must select at least one Wired Ports or Wireless check box.You can select more than one
check box.
8. Click the Apply button.
Your settings are saved.

Set Up a VLAN IPTV Bridge for a VLAN Tag Group

If the devices that are connected to the modem router's Ethernet LAN ports or WiFi network include an IPTV device,
your ISP might require you to set up a VLAN IPTV bridge for a VLAN tag group for the modem router's Internet
interface.
If you are subscribed to IPTV service, the modem router might require VLAN tags to distinguish between the
Internet traffic and the IPTV traffic. A VLAN IPTV bridge with a VLAN tag group prevents packets that are sent
between the IPTV device and the modem router's Internet port from being processed through the modem router's
network address translation (NAT) service.
You can add VLAN tag groups to a bridge and assign VLAN IDs and priority values to each VLAN tag group.
To add a VLAN tag group and enable the VLAN IPTV bridge:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter .routerlogin.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password.The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VLAN/IPTV Setup.
The VLAN/IPTV Setup page displays.
5. Select the Enable VLAN/IPTV Setup check box.
6. Select the By VLAN tag group radio button.
AC5300 WiFi VDSL/ADSL Modem Router Model D8500
Manage the WAN and LAN Network Settings
170