NETGEAR D8500 User Manual page 205

Wired devices are connected to the modem router with Ethernet cables.WiFi devices are connected to the
modem router through the WiFi network, in either the 2.4 GHz band or one of the 5 GHz bands. Devices that
are connected over a VPN connection are listed separately.
The following table describes the fields that can be displayed.
Field Description
Wired and WiFi devices
Status The status of the device in the network (Allowed or Blocked).This field is displayed only
when access control is enabled.
Connection The type of connection for the device.
Type
Device Name The device name, if detected.
IP Address The IP address that the modem router assigned to the device when it joined the network.
This address can change when a device is disconnected and rejoins the network.
MAC Address The unique MAC address.The MAC address does not change and is usually shown on the
product label.
VPN Client Devices
Device Name The device name, if detected.
Remote IP The IP address at the remote end of the VPN tunnel.
Address
(Continued)
Field Description
Local IP The IP address at the local of the VPN tunnel, that is, the IP address on the modem router.
Address
Connection The period since the connection was established.
Time
AC5300 WiFi VDSL/ADSL Modem Router Model D8500
Manage the Modem Router and Monitor the Traffic
205