Change A Port Triggering Rule - NETGEAR D8500 User Manual

Field
Service
Service Name
Service User
Service Type
Triggering Port
Inbound Connection
Connection Type
Starting Port
Ending Port
8. Click the Apply button.
Your settings are saved and the rule is added to the Port Triggering Portmap Table on the Port Forwarding /
Port Triggering page.

Change a Port Triggering Rule

You can change an existing port triggering rule.
To change a port triggering rule:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter .routerlogin.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password.The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
AC5300 WiFi VDSL/ADSL Modem Router Model D8500
Description
Enter the name of the custom service or application.
From the Service User menu, select Any , or select Single address and enter the IP
address of one computer:
•
Any .This is the default setting and allows any computer on the Internet to use
this service.
•
Single address . Restricts the service to a particular computer.
Select the protocol ( TCP or UDP ) that is associated with the service or application.
Enter the number of the outbound traffic port that must open the inbound ports.
Select the protocol ( TCP or UDP ) that is associated with the inbound connection.
If you are unsure, select TCP/UDP .
Enter the start port number for the inbound connection.
Enter the end port number for the inbound connection.
Manage Port Forwarding and Port Triggering
247