Cisco 500 Series Administration Manual page 631

28
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
629
To view policer statistics:
Click Quality of Service > QoS Statistics > Single Policer Statistics.
This page displays the following fields:
• Interface—Statistics are displayed for this interface.
• Policy—Statistics are displayed for this policy.
• Class Map—Statistics are displayed for this class map.
• In-Profile Bytes—Number of in-profile bytes received.
• Out-of-Profile Bytes—Number of out-profile bytes received.
Click Add.
Enter the parameters.
• Interface—Select the interface for which statistics are accumulated.
• Policy Name—Select the policy name.
• Class Map Name—Select the class name.
Click Apply. An additional request for statistics is created and the Running
Configuration file is updated.
Viewing Aggregated Policer Statistics
To view aggregated policer statistics:
Click Quality of Service > QoS Statistics > Aggregate Policer Statistics.
This page displays the following fields:
• Aggregate Policer Name—Policer on which statistics are based.
• In-Profile Bytes—Number of in-profile packets that were received.
• Out-of-Profile Bytes—Number of out-of-profile packets that were received.
Click Add.
Select an Aggregate Policer Name, one of the previously-created Aggregate
Policers for which statistics are displayed.
Cisco 500 Series Stackable Managed Switch Administration Guide
Quality of Service
Managing QoS Statistics