14
STEP 1
STEP 2
283
Voice VLAN Configuration
This section describes how to configure voice VLAN. It covers the following
topics:
•
Configuring Voice VLAN Properties
•
Auto Voice VLAN Settings
•
Telephony OUI
Configuring Voice VLAN Properties
Use the Voice VLAN Properties page for the following:
•
View how voice VLAN is currently configured.
•
Configure the VLAN ID of the Voice VLAN.
•
Configure voice VLAN QoS settings.
•
Configure the voice VLAN mode (Telephony OUI or Auto Voice VLAN).
•
Configure how Auto Voice VLAN is triggered.
To view and configure Voice VLAN properties:
Click VLAN Management > Voice VLAN > Properties.
•
The voice VLAN settings configured on the device are displayed in the Voice
VLAN Settings (Administrative Status) block.
•
The voice VLAN settings that are actually being applied to the voice VLAN
deployment are displayed in the Voice VLAN Settings (Operational Status)
block.
Enter values for the following fields:
•
Voice VLAN ID—Enter the VLAN that is to be the Voice VLAN.
Changes in the voice VLAN ID, CoS/802.1p, and/or DSCP cause the
NOTE
device to advertise the administrative voice VLAN as a static voice VLAN. If
Auto Voice VLAN Activation
the option
selected, then the default values need to be maintained.
•
CoS/802.1p —Select a CoS/802.1p value that to be used by LLDP-MED as
a voice network policy. Refer to
MED Network Policy
triggered by external Voice VLAN is
Administration > Discovery > LLDP > LLDP
for additional details.
Cisco 500 Series Stackable Managed Switch Administration Guide
VLAN Management
Voice VLAN