Ssh Client; Configuring Tcp/Udp Services - Cisco 500 Series Administration Manual

21

SSH Client

Configuring TCP/UDP Services

STEP 1
STEP 2
STEP 3
455
See Security: SSH Client.
The TCP/UDP Services page enables TCP or UDP-based services on the device,
usually for security reasons.
The device offers the following TCP/UDP services:
• HTTP—Enabled by factory default
• HTTPS—Enabled by factory default
• SNMP—Disabled by factory default
• Telnet—Disabled by factory default
• SSH—Disabled by factory default
The active TCP connections are also displayed in this window.
To configure TCP/UDP services:
Click Security > TCP/UDP Services.
Enable or disable the following TCP/UDP services on the displayed services.
• HTTP Service—Indicates whether the HTTP service is enabled or disabled.
• HTTPS Service—Indicates whether the HTTPS service is enabled or
disabled.
• SNMP Service—Indicates whether the SNMP service is enabled or
disabled.
• Telnet Service—Indicates whether the Telnet service is enabled or disabled.
• SSH Service—Indicates whether the SSH server service is enabled or
disabled.
Click Apply. The services are written to the Running Configuration file.
Cisco 500 Series Stackable Managed Switch Administration Guide
Security
SSH Client