Managing Qos Statistics; Policer Statistics - Cisco 500 Series Administration Manual

Quality of Service

Managing QoS Statistics

STEP 5
STEP 6
Managing QoS Statistics
NOTE
Cisco 500 Series Stackable Managed Switch Administration Guide
• Binding—Select to bind the policy to the interface.
• Permit Any—Select to forward packets on the interface if they do not match
any policy.
Permit Any can be defined only if IP Source Guard is not activated on
NOTE
the interface.
Click Apply. The QoS policy binding is defined, and the Running Configuration file
is updated.
Click Show Policy Binding Per Port to display the Interface Types (Port of Unit 1/
1 or LAG) per interface:
The following fields are displayed for all ports/LAGs:
• Policy Name
• Permit All
From these pages you can manage the Single Policer, Aggregated Policer, and
view queues statistics.

Policer Statistics

A Single Policer is bound to a class map from a single policy. An Aggregate Policer
is bound to one or more class maps from one or more policies.
Viewing Single Policer Statistics
The Single Policer Statistics page indicates the number of in-profile and out-of-
profile packets that are received from an interface that meet the conditions
defined in the class map of a policy.
This page is not displayed when the device is in Layer 3 mode.
28
628