Configuration Through The Gui - Cisco 500 Series Administration Manual

22
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
802.1X Configuration Through the GUI
NOTE
495
Click Apply, and the Running Configuration file is updated.
Use the Copy Settings button to copy settings from one port to another.
Workflow 4: To configure the quiet period
Click Security > 802.1X/MAC/Web Authentication > Port Authentication .
Select a port, and click Edit.
Enter the quiet period in the Quiet Period field.
Click Apply, and the Running Configuration file is updated.
Workflow 5: To configure the guest VLAN:
Click Security > 802.1X/MAC/Web Authentication > Properties.
Select Enable in the Guest VLAN field.
Select the guest VLAN in the Guest VLAN ID field.
Configure the Guest VLAN Timeout to be either Immediate or enter a value in the
User defined field.
Click Apply, and the Running Configuration file is updated.
Workflow 6: To configure unauthenticated VLANs
Click Security > 802.1X/MAC/Web Authentication > Properties.
Select a VLAN, and click Edit.
Select a VLAN.
Optionally, uncheck Authentication to make the VLAN an unauthenticated VLAN.
Click Apply, and the Running Configuration file is updated.
Web-based authentication is only supported in Layer 2 mode on Sx300 and SG500
devices. On SG500XG and SG500X devices, it is supported in Native and
Advanced Hybrid XG mode
Cisco 500 Series Stackable Managed Switch Administration Guide
Security: 802.1X Authentication
802. 1 X Configuration Through the GUI