System Settings - Cisco 500 Series Administration Manual
Stackable managed
Hide thumbs
Also See for 500 Series:
- Configuration manual (1140 pages) ,
- Administration manual (485 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
6
System Settings
STEP 1
103
The System Summary page provides a graphic view of the device, and displays
device status, hardware information, firmware version information, general PoE
status, and other items.
Displaying the System Summary
To view system information:
Click Status and Statistics > System Summary.
System Information:
•
System Stack Mode—Displays whether the device is part of a stack. See
the
Stack Unit Mode
If the system is in Native Stacking mode, the Firmware Version number
NOTE
shown is based on the version of the master.
•
System Operational Mode—Specifies whether the system is operating in
Layer 2 or Layer 3 system mode for 500 devices.
•
System Description—A description of the system.
•
System Location—Physical location of the device. Click Edit to go the
System Settings page to enter this value.
•
System Contact—Name of a contact person. Click Edit to go the System
Settings page to enter this value.
•
Host Name—Name of the device. Click Edit to go the System Settings
page to enter this value. By default, the device hostname is composed of
the word switch concatenated with the three least significant bytes of the
device MAC address (the six furthest right hexadecimal digits).
•
System Object ID—Unique vendor identification of the network
management subsystem contained in the entity (used in SNMP).
•
System Uptime—Time that has elapsed since the last reboot.
•
Current Time—Current system time.
section for more information about stack modes.
Cisco 500 Series Stackable Managed Switch Administration Guide
Administration
System Settings
Hide quick links:
Advertisement
Table of Contents
