21
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
479
Click Apply. The settings are defined, and the Running Configuration file is
updated.
Defining ARP Inspection Access Control Rules
To add more rules to a previously-created ARP Access Control group:
Click Security > ARP Inspection > ARP Access Control Rules.
The currently-defined access rules are displayed.
To add more rules to a group, click Add.
Select a Access Control Group and enter the fields:
•
IP Address—IP address of packet.
•
MAC Address—MAC address of packet.
Click Apply. The settings are defined, and the Running Configuration file is
updated.
Defining ARP Inspection VLAN Settings
To enable ARP Inspection on VLANs and associate Access Control Groups with a
VLAN:
Click Security > ARP Inspection > VLAN Settings.
To enable ARP Inspection on a VLAN, move the VLAN from the Available VLANs
list to the Enabled VLANs list.
To associate an ARP Access Control group with a VLAN, click Add. Select the
VLAN number and select a previously-defined ARP Access Control group.
Click Apply. The settings are defined, and the Running Configuration file is
updated.
Cisco 500 Series Stackable Managed Switch Administration Guide
Security
ARP Inspection