Cisco 500 Series Administration Manual page 115

6
113
IPv6 Multicast Routing Resources (for SG500XG and SG500X devices only)
• IPv6 Multicast Routes (8 TCAM entries per route)—Count is the number
of Multicast routes recorded on the device and TCAM Entries is the number
of TCAM entries being used for the Multicast routes.
• Maximum Entries—Select one of the following options:
- Use Default—On Sx500 the number of TCAM entries is 25% of the
TCAM size. On SG500X/SG500XG the number of Router TCAM entries
is 50% of the Router TCAM size.
- User Defined—Enter a value.
TCAM Resources Table
The following fields are displayed for each unit:
• Maximum TCAM Entries for Routing and Multicast Routing—Number of
TCAM entries available for routing and Multicast routing.
• IPv4 Routing
- In Use—Number of TCAM entries utilized for IPv4 routing.
- Maximum—Maximum number of TCAM entries available for IPv4
Routing.
• IPv4 Multicast Routing
- In Use—Number of TCAM entries utilized for IPv4 Multicast routing.
- Maximum—Maximum number of TCAM entries available for IPv4
Multicast routing.
• IPv6 Routing
- In Use—Number of TCAM entries utilized for IPv6 routing.
- Maximum—Maximum number of TCAM entries available for IPv6
Routing.
• IPv6 Multicast Routing
- In Use—Number of TCAM entries utilized for IPv6 Multicast routing.
- Maximum—Maximum number of TCAM entries available for IPv6
Multicast routing.
• Maximum TCAM Entries for Non-IP Rules—Number of TCAM entries
available for non-IP rules.
Cisco 500 Series Stackable Managed Switch Administration Guide
Administration
Routing Resources