Rear Brake Pad Replacement - Honda MUV700 big red Service Manual

lower the caliper body, install the slide pin bolt and
tighten it.
TORQUE: 22.5 N'm (2.3 kgf·m, 17 Ibf.ftl
Operate the brake pedal to seat the caliper piston
agai nst the pad.
Install the front w heel (page 15-6).
REAR BRAKE PAD REPLACEMENT
Remove the rear wheel (page 17-5).
Release the parking brake.
Remove the sl ide pin bolts and the caliper body
from the caliper bracket.
Remove the brake pads from the caliper bracket.
Always replace rhe
Install new pads onto the caliper bracket properly so
brake pads m
p8IfS the wear indicator on the inner pad is facing the
to ensure even disc
upper side.
pressUle
Turn the caliper piston using the special tool or
equivalent to retract it and position the piston so its
groove is aligned with the locating pin of the inner
pad .
TOOL:
lock nut wrench 07716·0020100
Install the caliper body over the pads and caliper
bracket.
BRAKE SYSTEM
CAI.!P,'R
BDDY
18-9