Steering Wheel Removal/Installation; Steering Column And Shaft Removal - Honda MUV700 big red Service Manual

STEERING WHEEL
REMOVAL/INSTALLATION
Mark the steering
Remove the following:
wheel and shaft -
center cover (by releasing the three bosses
before removing to
from the steering w h eel)
identify ils original - nut
pOSl/lon, -
steering wheel
- washer
Installation is in the reverse order of removal.
TORQUE: 49 N ·m (5.0 kgf·m, 36 IbUt)
STEERING COLUMN AND SHAFT
REMOVAL
Remove the steering wheel (page 16-5).
WASHER
./'. . /J
Y
SHAFT
Raise the front wheels off the ground (page' ·48).
Release the retaining straps and open the front
hood.
Remove the following:
- upper pinch bolt and lock washer
- four column mounting bolts (while supporting
the steering column securely)
Lift
the steering col u mn assembly to disconnect the
steering shaft and remove it out of the frame.
Remove the lower pinch bolt and lock washer, and
the steering shaft.
STEERING SYSTEM
COVER
NUT
STEERING WHEEL
16-5