Engine Oil Change - Honda MUV700 big red Service Manual

NOTE -
• Other viscosities shown in the chart may be used
when the average temperature in your driving
area is within the indicated range.
Reinstall the oil filler cap and dipstick.
Install the rubber sheet to the two tabs.
Install the seat cushion (page 3-4),
OIL CHANGE
NOTE:
• Change the oil with the engine warm to assure
complete and rapid draining.
Place the vehicle on level ground.
Remove the following :
- maintenance l id (page 3-16)
- driver seat cushion (page 3-4)
Start the engine and let it idle for a few minutes.
Stop the engine.
Remove the drain bolt and the filler cap (release the
ru bber sheet from the tabs) to drain the engine oil.
Remove the O-ri ng and sealing washer from the
d rain bolt.
Install a new sealing washer onto the drain bolt.
Coat a new O-ring with oil and install it into the
groove in the d rain bolt.
After draining the oit completely, install the drain
bolt and tighten it.
TORQUE: 25 N·m (2.5 kgf·m , 18 Ibf.ft)
MAINTENANCE
OIL VISCOSITIES
1
I .
'11'1
·iii
,16
I
I I
.,.
,
" " "
..
,,·c
.,0
,
io
,
"
. . ..
'" lZO' F
DRAINBOLT ~
SHEET
DRAIN BOLT
4-13