Cylinder Head Assembly - Honda MUV700 big red Service Manual

CYLINDER HEADIVALVE/CAMSHAFT
CYLINDER HEAD ASSEMBLY
SPRING RETAINER
~-"'o.?,)
OUTER VALVE SPRING
--~
INNER VALVE SPR ING - --
STEM SEAL
SPRING SEAT
VALVE G
INTAKE VALVE
----_; 1
EXHAUST VALVE
Blow through the oil passage (stud bolt hole) in the
cylinder head with compressed air.
Install the valve spring seats and new stem seals.
Lubr icate the va lve stem sliding surface with molyb-
denum disulfide grease.
Insert the valve int o the guide while turning it
slowly 10 avoid damaging to the stem seal.
Install the inner and outer valve spr ings with the
tightly wound coils faci ng the combustion chamber.
Install the spring retainer.
~
VALVE SPRINGS )
"".,,"~.~
....
~
I \
SPRING SEAT
qI
STEM SEAL
Combustion chamber side
9-19