Brake Pad/Disc; Front Brake Pad Replacement - Honda MUV700 big red Service Manual

BRAKE SYSTEM
Fill the reservoir to the MAX line with DOT 4 brake
fluid from a sealed container.
Install the reservoir cap so the arrow is facing for-
ward.
MAX LINE
Turn the rubber cap inside out and install it over the
;::=========J111I111I111I111I111I111I111I111I111~
reservoir cap securely.
Close the fron t hood and secure it with the straps.
BRAKE PAD/DISC
Che'* the flUid level
in the master
cylmder reservoir
as
thiS
operation
causes the fluid
level to flS8
FRONT BRAKE PAD REPLACEMENT
Remove the front wheel (page 15-6).
Push the caliper piston all the way in by push ing the
caliper body against the disc to allow installation of
new brake pads.
Remove the lower sl ide pi n bolt.
Pivot the caliper body up and remove the brake
pads from the caliper bracket.
Always rep/ace the
Install new pads onto the cali per bracket properly so
brake pads
In
pairs
the wear indicator on the inner pad is facing the
to ensure even disc upper side.
pressure
18-8
""""
....•
~
RUBBER CAP
LA •• '"""
BODY
BRIIKEPADS