Cisco ONS 15454 Software Feature And Configuration Manual page 214

show ons alarm failure pos <interface-number>
show ons alarm failure pos <interface-number>
This commands displays the link layer failures.
Parameter
interface-number
Defaults N/A
Command Modes
Privileged EXEC
Usage Guidelines This commands displays set (active) failures for a specific interface at the pos layer. The display also
specifies if an alarm has been demoted, as defined in Telcordia GR-253.
Examples
router#show ons alarm failure pos 0
POS0
Active Alarms : None
Demoted Alarms: None
Related Commands show controller pos
show ons alarm defect
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
A-18
Description
Number of the interface <0-1>
Appendix A Command Reference
78-15224-02