Monitoring And Verifying Vlan Operation - Cisco ONS 15454 Software Feature And Configuration Manual

Chapter 7 Configuring VLANs
encapsulation dot1Q 1 native
bridge-group 1
!
interface POS0.2
encapsulation dot1Q 2
bridge-group 2
!
interface POS0.3
encapsulation dot1Q 3
bridge-group 3
!
interface POS0.4
encapsulation dot1Q 4
bridge-group 4

Monitoring and Verifying VLAN Operation

After the VLANs are configured on the ML-Series card, you can monitor their operation by performing
the following task, in privileged EXEC mode, show vlans vlan-id. This command displays information
on all configured VLANs or on a specific VLAN (by VLAN ID number).
Two similar commands exist. The command show vlans gives information regarding IEEE 802.1Q
Caution
VLANs configured on the ML-Series card. The command show vlan gives information regarding the
VLAN tunnel. For more information on VLAN tunneling, see
Layer 2 Protocol Tunneling."
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
Monitoring and Verifying VLAN Operation
Chapter 8, "Configuring IEEE 802.1Q and
7-5