Cisco ONS 15454 Software Feature And Configuration Manual page 137

Chapter 10 Configuring Networking Protocols
Table 10-2 Default OSPF Configuration (continued)
Feature
OSPF database filter
IP OSPF name lookup
Log adjacency changes
Neighbor
Neighbor database filter
Network area
Router ID
Summary address
Timers LSA group pacing
Timers shortest path first (spf)
Virtual link
Figure 10-1
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
shows an example of an IP routing protocol using OSPF.
Default Setting
Disabled. All outgoing link-state advertisements (LSAs) are
flooded to the interface.
Disabled.
Enabled.
None specified.
Disabled. All outgoing LSAs are flooded to the neighbor.
Disabled.
No OSPF routing process defined.
Disabled.
240 seconds.
spf delay: 5 seconds.
spf-holdtime: 10 seconds.
No area ID or router ID defined.
Hello interval: 10 seconds.
Retransmit interval: 5 seconds.
Transmit delay: 1 second.
Dead interval: 40 seconds.
Authentication key: No key predefined.
MD5: No key predefined.
Configuring IP Routing
10-11