Table 10-6 Bgp Show Commands - Cisco ONS 15454 Software Feature And Configuration Manual

Chapter 10 Configuring Networking Protocols

Table 10-6 BGP Show Commands

Command
Router# show ip protocols [summary]
Router# show ip bgp neighbor
Router# show ip bgp summary
Router# show ip bgp
The following examples show various information about the BGP configuration:
Router# show ip protocols
Routing Protocol is "bgp 1"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
IGP synchronization is enabled
Automatic route summarization is enabled
Redistributing: connected
Neighbor(s):
Address
192.168.2.1
Maximum path: 1
Routing for Networks:
Routing Information Sources:
Gateway
Distance: external 20 internal 200 local 200
Router# show ip bgp neighbor
BGP neighbor is 192.168.2.1,
BGP version 4, remote router ID 192.168.2.1
BGP state = Established, up for 00:08:46
Last read 00:00:45, hold time is 180, keepalive interval is 60 seconds
Neighbor capabilities:
Route refresh: advertised and received(new)
Address family IPv4 Unicast: advertised and received
Received 13 messages, 0 notifications, 0 in queue
Sent 13 messages, 0 notifications, 0 in queue
Route refresh request: received 0, sent 0
Default minimum time between advertisement runs is 5 seconds
For address family: IPv4 Unicast
BGP table version 3, neighbor version 3
Index 1, Offset 0, Mask 0x2
2 accepted prefixes consume 72 bytes
Prefix advertised 2, suppressed 0, withdrawn 0
Number of NLRIs in the update sent: max 2, min 0
Connections established 1; dropped 0
Last reset never
Connection state is ESTAB, I/O status: 1, unread input bytes: 0
Local host: 192.168.2.2, Local port: 179
Foreign host: 192.168.2.1, Foreign port: 11001
Enqueued packets for retransmit: 0, input: 0
Event Timers (current time is 0x45B7B4):
Timer
Retrans
TimeWait
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
Purpose
Displays the protocol configuration.
Displays detailed information about the BGP and TCP
connections to individual neighbors.
Displays the status of all BGP connections.
Displays the content of the BGP routing table.
FiltIn FiltOut DistIn DistOut Weight RouteMap
Distance Last Update
remote AS 1, internal link
Starts Wakeups
13 0
0 0
mis-ordered: 0 (0 bytes)
Next
0x0
0x0
Configuring IP Routing
10-29