Cisco ONS 15454 Software Feature And Configuration Manual page 203

Appendix A Command Reference
[no] pos scramble-spe
Use this command to enable scrambling.
Syntax Description
This command has no arguments or keywords.
Defaults The default value depends on the encapsulation.
encap
LEX
PPP/HDLC
Command Modes Interface configuration mode (POS only)
Usage Guidelines
This value is normally configured to match the setting on the peer Path Terminating Equipment (PTE).
This command may change the pos flag c2 configuration.
Examples
Gateway(config)#int pos0
Gateway(config-if)#pos scramble-spe
Related Commands
pos flag c2
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
scrambling
pos scramble-spe
no pos scramble-spe
[no] pos scramble-spe
A-7