Monitoring And Verifying Acl - Cisco ONS 15454 Software Feature And Configuration Manual

Monitoring and Verifying ACL

You will need to increase the TCAM size if you see the following error message:
Caution
Warning:Programming TCAM entries failed
Please remove last ACL command to re-activate ACL operation.
!<ACL number or name> <IP or IPX> <INPUT_ACL or OUTPUT_ACL> from TCAM group for !<interface>
Please see the documentation to see if TCAM space can be
increased on this platform to alleviate the problem.
Monitoring and Verifying ACL
Use the following command to monitor and verify ACLs:
Router# show ip access-lists 1
Standard IP access list 1
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
15-6
permit 192.168.1.1
permit 192.168.1.2
Chapter 15 Configuring Access Control Lists
78-15224-02