Section 5: Programmer Keyboard Commands; Programmer Keyboard Commands - Honeywell AlarmNet 7847i-E Installation And Setup Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Programmer Keyboard Commands

Programmer keyboard commands can be used to quickly view your Internet connectivity
settings and options. Most commands require you to press the [shift] key and then the
designated command key. (See the keys designated in red on the 7720P Programming Tool.)
[A]
[B]
[C]
[D]
Programmer Keyboard Commands
7847i-e
x.x.xx mm/dd/yy
MAC xxxxxxxxxxxx
MAC CRC xxxx
Mon 23 Jul 2007
03:45:23 am
Physical Link:
GOOD
NIC IP Address:
xxx.xxx.xxx.xxx
Subnet Mask:
xxx.xxx.xxx.xxx
Gateway IP Address:
xxx.xxx.xxx.xxx
DNS Server IP:
xxx.xxx.xxx.xxx
Encryption Test:
AES Passed!
Software Revision
Depending on unit being programmed, either "7847i" or
"7847i-e" will be displayed.
"x.x.xx" indicates the installed software Revision.
Mm/dd/yy indicates month, day and year of the
revision.
MAC Address
"xxxxxxxxxxxx" indicates the 7847i/7847i-E's unique
identification number.
"xxxx" indicates the MAC CRC number. This number is
also found on the label on the module, as well as the
label on the box.
Time
Retrieves the current date and time from the AlarmNet
network in Greenwich Mean Time (GMT). This display
confirms that the module is in sync with network.
Network Diagnostics Display
Indicates whether device has detected a physical
connection to the internet.
Press the [space] key to go to the next field.
IP Information Display
Displays the IP address assigned to this device.
Press the [space] key to go to the next field.
Displays the 32-bit address mask used to indicate the
portion (bits) of the IP address that is being used for
the subnet address.
Press the [space] key to go to the next field.
Press the [backspace] key to go to the previous field.
Displays the IP address assigned to the Gateway.
Press the [space] key to go to the next field.
Press the [backspace] key to go to the previous field.
Displays the IP address assigned to the DNS (Domain
Name System) server.
Press the [space] key to go to the next field.
Press the [backspace] key to go to the previous field.
Performs a self-test of the chosen encryption algorithm.
Press the [space] key to go to the next field.
Press the [backspace] key to go to the previous field.
S E C T I O N 5
5-1