Section 1: General Information; Introduction; System Features; About Private Network Application - Honeywell AlarmNet 7847i-E Installation And Setup Manual

Internet/intranet communication modules with remote services
Hide thumbs Also See for AlarmNet 7847i-E:
Table of Contents

Advertisement

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
o

Introduction

o

System Features

o

About Private Network Application

o
About AlarmNet-i Internet Application
o
Encryption
o
Enterprise Related Encryption Functions
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Introduction
AlarmNet's
Communication Module were developed to transport alarm signals via the Internet or
Private LAN (7847i-E only). These easy-to-install devices provide sophisticated data security
and communicate with all AlarmNet central stations through AlarmNet's server, or directly
to a 7810iR-ent Internet/Intranet receiver in a private network application (7847i-E). In
addition to alarm reporting, the 7847i and 7847i-E provide upload/downloading capability
via the internet or a Private LAN (7847i-E only).
System Features
Basic features of the 7847i and 7847i-E include:
Easy CAT-5 10 BaseT connection to a hub or router
Installs behind firewalls without compromising network security
Supports dynamic or static IP addressing
Quick connection to compatible Honeywell series control panels
Simple programming using a 7720P programming tool or AlarmNet Direct website
Reports fire, burg, and status messages via the Internet (or Intranet for 7847i-E)
Allows uploading and downloading of control panel data over the Internet (or Intranet for 7847i-E)
Supports remote control of alarm systems via Remote Access feature, and email notification of
events via Multi-Mode feature (Web Service)
About Private Network Application
The 7847i-E may be configured to transmit signals within a private network application to a
7810iR-ent receiver. Up to 300 7847i-E Internet/Intranet Communication Modules may be
routed to a single 7810iR-ent receiver. In a private network application, the signals are not
routed to the AlarmNet Control Center (see Figure 1).
MAS
Figure 1. 7810iR-ent/7847i-E Intranet/Internet Block Diagram
7847i Internet Communication
INTRANET
ETHERNET PORT
(CENTRAL STATION,
7810iR-ent
7847i-E
General Information
o
Installation Key
o
Recovery Mode
o
Remote Services
o
Modes of Operation
o
Specifications
Module
LAN
ROUTER
BANK, ETC.)
S E C T I O N
and
7847i-E Internet/Intranet
INTERNET
INTERNET
ALARMNET
1
CELL
ALARMNET - i
7847i-E-031-V0
1-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alarmnet 7847i

Table of Contents