Honeywell AlarmNet 7847i-E Installation And Setup Manual page 28

7847i/7847i-E Installation and Setup Guide
PROMPTS
Keypad Address
26
(28)_
Supervision
27
(24 Hours)_
Old Alarm Time
28
10 Minutes_
3-14
4204/
ZONE
ENTRY
2-4204
TRIG.
✔
✔ ✔
✔ ✔
OPTIONS
Must be programmed if using either the Remote
[01-30]
Access feature or Direct Wire downloading. Enter
the appropriate device address.
NOTES:
1. This address must also be programmed as an
alpha keypad in the control panel. If a full
enhanced graphic interface to the system is
desired, the keypad must also be enabled as an
AUI (Advanced User Interface) device. DO NOT
connect to an actual keypad (or any other
device) assigned to this address.
2. If using a compatible LynxR-I series control
(when available), this address must be set to
"1."
3. This address must be unique from the "Device
Address" entered in Prompt 23, and cannot
equal that device address plus 1 (one) if using
2-4204 mode.
• 24 Hours
The AlarmNet network or the 7810iR-ent if
Private LAN is enabled on the 7847i-E, must hear
• 1 Hour
at least one supervisory message from the module
• US UL Line
during this supervision period; otherwise,
6 Min
AlarmNet or the 7810iR-ent if Private LAN is
• CN UL Line
enabled on the 7847i-E, notifies the central
Lvl 3 (3 Min)
station that a communication failure has
• US UL Line occurred. If the supervision period is changed
after registration, you must re-register the
90 Sec
module.
• CN UL Line
Press the [space] key to scroll through choices.
Lvl 4 (90 Sec)
• CN UL Line
Lvl 5 (75 Sec)
• None
• 30 Day
•10 Min.
Sets how long an undeliverable alarm is retried
• 15 Min.
for delivery to the central station. If the message
• 30 Min.
is not validated, it is retried until the old alarm
• 1 Hr
time is reached or the message is validated.
• 2 Hrs
Press the [space] key to scroll through choices.
• 4 Hrs
• 8 Hrs
• 12 Hrs
UL NOTE: Must be 10 minutes.
• 24 Hrs
DESCRIPTION