Setpoint Programmer Overview Widgets; Table 36 Setpoint Progammer Overview Widget Features - Honeywell 900 User Manual

Setpoint Programmers
Overview

Setpoint Programmer Overview widgets

Setpoint Programmer data is displayed on the Setpoint Programmer widgets.
Setpoint Programmer
Shows status of the Setpoint Programmer's
current profile. Use buttons to advance to next
step, run, hold, or reset.
Item
Title
Profile number
Profile name
State
120

Table 36 Setpoint Progammer Overview widget features

Name of the selected programmer block. Touch the blue title bar (if
available) to jump to the SPP Operate display. See page 122.
Location of this profile in controller RAM.
Name of the selected profile.
READY: Profile is at the beginning of segment and is ready to run. All
events are OFF.
HOLD: Profile is paused at the setpoint value shown.
RUN: Profile is executing normally.
GHOLD: Profile is paused because of excessive deviation.
STOP: Profile has reached the end of the last segment.
DISABLE: Profile is prevented from starting until the programmer disable
control is ON.
900 Control Station User Guide
Setpoint Programmer with jump
Shows status of the Setpoint Programmer's
current profile. Use buttons to advance to next
step, run, hold, or reset. Touch blue title bar to
jump to SPP Operate display.
Description
Revision 9
May 2014