Optional Ipv6 Neighbor Discovery - Cisco Nexus 7000 Series Configuration Manual

Configuring IPv6
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

Optional IPv6 Neighbor Discovery

You can use the following optional IPv6 Neighbor Discovery commands:
Command
ipv6 nd hop-limit
ipv6 nd managed-config-flag
ipv6 nd mtu
ipv6 nd ns-interval
ipv6 nd other-config-flag
ipv6 nd ra-interval
ipv6 nd ra-lifetime
ipv6 nd reachable-time
ipv6 nd redirects
ipv6 nd retrans-timer
ipv6 nd suppress-ra
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
3-22
Send "Other Stateful Configuration" flag: false
Send "Current Hop Limit" field: 64
Send "MTU" option value: 1500
Send "Router Lifetime" field: 1800 secs
Send "Reachable Time" field: 10 ms
Send "Retrans Timer" field: 0 ms
Neighbor-Solicitation parameters:
NS retransmit interval: 1000 ms
ICMPv6 error message parameters:
Send redirects: false
Send unreachables: false
Purpose
Configures the maximum number of hops used in router
advertisements and all IPv6 packets that are originated by
the router.
Sets the managed address configuration flag in IPv6 router
advertisements.
Sets the maximum transmission unit (MTU) size of IPv6
packets sent on an interface.
Configures the interval between IPv6 neighbor solicitation
retransmissions on an interface.
Configures the other stateful configuration flag in IPv6
router advertisements.
Configures the interval between IPv6 router advertisement
(RA) transmissions on an interface.
Configures the router lifetime value in IPv6 router
advertisements on an interface.
Configures the amount of time that a remote IPv6 node is
considered reachable after some reachability confirmation
event has occurred.
Enables ICMPv6 redirect messages to be sent.
Configures the advertised time between neighbor
solicitation messages in router advertisements.
Suppresses IPv6 router advertisement transmissions on a
LAN interface.
Chapter 3 Configuring IPv6
OL-20002-02