Configuring Object Tracking; Information About Object Tracking - Cisco Nexus 7000 Series Configuration Manual

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

Configuring Object Tracking

This chapter describes how to configure object tracking on Cisco NX-OS devices.
This chapter includes the following sections:
•
•
•
•
•
•
•
•
•
•
•

Information About Object Tracking

Object tracking allows you to track specific objects on the device, such as the interface line protocol
state, IP routing, and route reachability, and to take action when the tracked object's state changes. This
feature allows you to increase the availability of the network and shorten recovery time if an object state
goes down.
This section includes the following topics:
•
•
•
•
OL-20002-02
Information About Object Tracking, page 21-1
Licensing Requirements for Object Tracking, page 21-3
Prerequisites for Object Tracking, page 21-3
Guidelines and Limitations, page 21-3
Configuring Object Tracking, page 21-4
Verifying Object Tracking Configuration, page 21-14
Object Tracking Example Configuration, page 21-14
Related Topics, page 21-14
Default Settings, page 21-14
Additional References, page 21-14
Feature History for Object Tracking, page 21-15
Object Tracking Overview, page 21-2
Object Track List, page 21-2
High Availability, page 21-3
Virtualization Support, page 21-3
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
21
C H A P T E R
21-1